AeroBed For Kids
A good night's rest for your child means a good night's rest for you. AeroBed for Kids is the portable bed perfectly designed for children ages 3 and up. With our Instant-On AC Pump, AeroBed for Kids inflates in 60 seconds. Channel-construction design holds up to 150 lbs. A large 50" x 25" sleep surface with 4" surround safety cushion prevents kids from rolling off the bed. The thick, washable, fitted mattress pad is easy to clean and provides extra comfort and convenience.
AeroBed for Kids deflates in 15 seconds and rolls up and slides into its matching carry bag for easy storage and transport.
|
 |
| Total Thickness | 8 Inches | | | Otional Cover | Washable Mattress Cover | | | Duffle Bag | Included | | | Pump | Recessed 120-volt pump, 60 Hz, 1.4 Ampere with two year warranty | | | Cord | 14 Feet with 2 Pronged Plug | | | Control | Patented One Touch® Comfort Control Wand | | | Supported Weight | 150 Pounds | | | Seams | Electronically Welded | | | Air Chamber | Puncher Resistant, 18 Gauge,Heavy-Duty Poly-vinyl chloride (PVC) | |
|
|
|
|
| | | 1. | Dimensions | | | 60" L X 36" W X 8"H; supports up to 150 lbs.
Item weight: 6.16 lbs.
Thickness of PVC: 18 gauge. | | | | 2. | Material | | | The AeroBed for Kids is made of puncture-resistant, 18 gauge, heavy-duty poly-vinyl chloride (PVC). The material is non-allergenic, and is electronically welded at the seams for superior strength and durability. | | | | 3. | Cleaning | | | AeroBed for Kids is made of puncture-resistant, heavy-duty vinyl. It is non-allergenic, non-stainable and cleans up with soap and water or mild household cleaners. Do not use strong chemicals to clean your bed. Allow your AeroBed for Kids to air dry completely after cleaning and before storing. | | | | 4. | General Care and Maintenance | | | 1. Inspect your AeroBed for Kids prior to each use.
2. Keep your bed away from any sharp objects. Large cuts or snags may not be repairable and will not be covered by your AeroBed for Kids warranty.
3. When not in use, store your bed in a clean, dry place out of extreme temperatures.
4. In case of incidental damage to your bed, a repair kit with instructions is included with each bed. Please follow repair kit instructions carefully. Additional vinyl repair kits can be purchased through Technical Assistance. | | | | 5. | Important safety information and warnings | | | It is your responsibility to read and always follow the safety, care and maintenance instructions for your AeroBed for Kids. Always instruct and supervise others on the proper use, maintenance and safety of your bed.
IMPORTANT: Preparation of your AeroBed for Kids requires no tools. Use of tools may damage your bed.
1. WARNING: Adult supervision required. Follow all safety instructions to avoid serious injury.
2. Remove all sharp objects from area where bed will be set up and used.
3. This bed is not designed for use by children under 3 years of age.
4. This bed should never be used within a bed frame, It should be placed on a flat surface on the ground or floor only.
5. This product is intended for use as a bed only. It is not intended as a water flotation or lifesaving device. Do not use it in a pool or other body of water. | | | | 6. | Pump details | | | The Instant-On AC Pump is a compact and powerful pump that runs on 110-volt AC current, and plugs in to any standard household outlet. The patented Auto on feature allows for hangs-free inflation: to operate, simply twist the pump in place on the Quick Air Release valve. The AeroBed for Kids inflates automatically, and is fully inflated in less than 60 seconds. You cannot over inflate your AeroBed for Kids.
The UL listed pump features a powerful 120-volt AC, 60Hz, 1.0 ampere motor, a standard U.S. two prong plug, and a 14ft long cord for extra maneuverability. The Instant-On AC Pump is for indoor use only. | | | | 7. | Usage conditions | | | Your AeroBed for Kids is meant to be used as an extra bed, but is durable enough to sleep on every night. Do not allow the pump to get wet. Allowing the pump to get wet will void your warranty. Your AeroBed for Kids is not a toy and is not meant to be used as a flotation device.
The AeroBed for Kids is made of heavy duty puncture resistant PVC. However, avoid leaving sharp objects near the AeroBed for Kids due to the risk of punctures. Be sure to use the AeroBed for Kids on a flat surface without any sharp points that can puncture the bed. In addition, the AeroBed for Kids is engineered to support 150 pounds of weight, however, we do not recommend jumping on the AeroBed for Kids or using the AeroBed for Kids as a trampoline or toy. | | | | 8. | Trouble shooting | | | Problem: Bed has a broken part
Your AeroBed for Kids and pump are guaranteed to be in perfect condition when you receive it. The bed and pump are also guaranteed to perform under normal usage conditions for one year from the date of purchase. If, upon purchase, you discover your bed or pump is in some way defective, or if a part breaks within the warranty period, contact us, or return it to the place of purchase for a refund. All parts are replaceable.
Problem: Air Release Valve is broken
If your valve is damaged (e.g., the tab has broken off), you can request a new valve, contact us.
Problem: Product is leaking air.
Possible reasons and solutions . . .
1. Air is leaking from the Air Release Valve. If air is leaking from Air Release Valve, carefully remove the round black plastic gasket (or white silicone gasket, depending on model) inside the Air Release Valve cover.
Rinse this gasket in warm water for 10 minutes, then cool and towel dry.
Re-insert gasket in the valve cover, making certain that the side of the gasket with the U-shaped groove faces into the cover. Leave valve in open position for approximately 30 minutes. Then close and proceed with inflation instructions.
2. Air is leaking from a puncture or tear in the product.
If you have a puncture or tear in your product, it may be possible to repair the damage by using the Vinyl Repair Kit included with your product. Follow all instructions and heed all warnings included in the repair kit.
To obtain a new vinyl repair kit, contact us.
Problem: Bed won't inflate.
Possible reasons and solutions . . .
1. The Air Release Valve is open. If the valve is open, close it by using two thumbs to push cover and snap it into valve.
2. The pump is not charged (if your AeroBed for Kids included the Rechargeable Ni-Cd Pump).
Charge pump according to directions in instruction manual included with your Aero® product, or see instructions on this website.
3. The pump is not plugged in (if your AeroBed for Kids included the Instant On AC Pump). Plug pump into any 110 Volt AC electrical outlet (220V product sold outside North America).
Problem: My rechargeable pump got wet. What do I do?
(if your AeroBed for Kids included the Rechargeable Ni-Cd Pump).
Once water gets inside the rechargeable pump, it may no longer work. Replacement pumps can be purchased direct form Aero Products by visiting our Accessories page.
| | |
|
|
