| Preview |
DIGITAL SLEEP |
NATIONAL BRAND |
THE DIGITAL SLEEP DIFFERENCE |
 |
Genuine European Vulcanized 25 Gauge Latex with Cotton Canvas Cover |
24 Gauge Rubber |
Thicker and more durable, the original Euro design of the DIGITAL SLEEPChamber provides a full "6" of air suspension for pressure reduced sleep The vulcanized process is similar to that of tire manufacturing and virtually eliminates all seams. The material actually flows together and becomes a one-piece construction. The natural cotton material is adhered chemically to the latex offering a soft texture & eliminating air leakage through the pores. |
 |
Double Sealed Borders |
Lap Seam Construction |
The Chamber borders are constructed with a 1.25" seam and reinforced with another 1.25" seam for maximum strength. Double sealing creates a more reliable support system for years of proven longevity and trouble free use. |
 |
Double I-Beam Design |
Single Reinforced I-Beam |
While other "I" Beam construction offers only one side sealing, the dual side "I" Beam is actually two layers of canvas with two layers of rubber bonded together joining the top and bottom of the Air Chamber. Where this "I" Beam meets either the top or bottom, the canvas/latex layer flairs out each way offering twice the holding power for extra strength and years of durable use. |
 |
Multi-Directional Box Baffle Design |
Transverse Horizontal Chambers |
DIGITAL SLEEP suspension chambers feature a "square pillow surface" to evenly support the body from head to toe, side to side, and at the edges of the chamber regardless of inflation level for the ultimate in comfort. This design also allows sleeping in the center of the dual models without the need of a foam wedge and with no sensation of rolling to either the middle or edge. Competing designs allow only horizontal air flow, which can actually cause a cupping effect leading to improper support. |
 |
Uni-Bonded Chamber/Hose Assembly |
Two Stage Attachment of Air Hose |
By sealing the air hose with special flexible rubber at the time of chamber manufacturing, the entire assembly is a single unit with no external connections to eliminate the concern of air loss, yet retains the full range of movement. |
 |
Steel Reinforced Kink Free Air Deployment Hose |
Standard PVC Tubing |
The addition of the imbedded surgical steel coil provides a quieter and more responsive inflation process. The kink free design improves pump life and offers precise comfort adjustment. |
 |
Brass Connection Boot |
Plastic Fitting |
Engineered to assure zero air loss at critical hose/connection juncture. |
 |
Barrel Twist-N-Lock Inflator Connector |
Snap-On Clip |
Easy to use barrel connector locks in place to prevent accidental disconnect during use and is not rendered ineffective by dust or pet hair commonly associated with clip on connections. |
 |
Pressure Activated Internal Seal |
None |
The Twist N' Lock connector houses the unique seal that prevents the back flowof air allowing the bed to be moved without the need to deflate the chambers. |
